NARAKU VERGASER CVK 24 BEELINE VELOCE 50 4T, GT 4T NEU
für HONDA, YAMAHA, KYMCO, SUZUKI, APRILIA, MBK, ADLY, AEON, BAOTIAN, BENZHOU, BUFFALO, ERING, JINLUN, KEEWAY, KREIDLER, LONGJIA, PEUGEOT, QINGQI, REX, RIEJU, SACHS, SCOMADI, ZONGSHEN
Prüfen Sie die Kompatibilität mit Ihrem Motorrad
FINDE DEIN MOTORRAD - COMPATIBILITY TABLE
Carburetor Naraku - 24mm
Vacuum controlled 24mm tuning carburetor from NARAKU.
The passage of 24mm allows a significantly larger gas throughput and releases more power in connection with a larger intake manifold.
Due to the size, this carburetor should only be used from 85ccm [51mm] cylinders with correspondingly large cylinder heads.
The carburetor is equipped with an electric choke. The carburettor is designed for 51mm cylinder kits from NARAKU.
The original gas bowden cable can still be used, the bowden cable cover on the carburetor side has to be shortened a little.
The carburetor was deliberately equipped without an accelerator pump to prevent the engine from being over-greased.
This carburetor is the everyday version of the power increase and can be used for 4T engines from 85cc - 180cc. The supplied carburetor jetting was however tuned for the 85ccm [51mm] engines.
Carburetor nozzles for tuning can be selected from the list below. The use of the 'Intake manifold set 24mm' is recommended.
The carburettor can also be used as a spare part from 125cc engines.
Main nozzle 102
Secondary nozzle 35
Intake connection: 32mm
Connection width air filter: 42mm
Y
