MOTUL 105935 ENGINE OIL SCOOTER EXPERT 4T 10W40 1L SEMISYNT

Motul Scooter Expert 4T MB 10W-40

MOTUL SCOOTER EXPERT 4T 10W40 MB is a 4-stroke scooter engine oil based on MOTUL- Technosynthesis?. Exceeds the requirements of scooter manufacturers, which prescribe for modern mini and maxi scooters, the viscosity SAE 10W-40 in conjunction with JASO MB.

SPECIFICATIONS/STANDARDS:
STANDARDS: API SM / SL / SJ
APPROVALS: JASO MB N° M033MOT137

JASO (Japanese Automobile Standards Organization) has developed its own standard for 4-stroke motorcycle engine oils, JASO T 903. The gradations MA, MA1 and MA2 facilitate the selection of motorcycle engine oils specifically designed for wet clutches. JASO MB stands here for a 2% reduction in fuel consumption compared to an engine oil in viscosity 10W40 and JASO MA due to particularly low friction losses under all operating conditions.

ADVANTAGES:
- Smooth running viscosity allows particularly fast oiling during cold starts, saves fuel and protects the starter and battery from premature wear.
- Excellent anti-oxidation, anti-corrosion and anti-foaming properties
- Optimized content of sulfur and phosphorus ensure long-term functioning of catalytic converters.
- Low evaporation loss reduces oil consumption.
- Perfect wear protection even under difficult operating conditions, e.g. stop & go traffic.
- Specially adapted filler snorkel for comfortable and leak-free filling even with very small oil filler openings.

RECOMMENDATIONS AND NOTES:
Change interval according to vehicle manufacturer's specifications or adjusted according to operating conditions. Before use, it is essential to observe the manufacturer's service documents and recommendations!

CAUTION: Do not use in vehicles if the manufacturer specifies an oil with JASO MA release.

PROPERTIES:
Color (visual) brownish
Viscosity SAE J 300 10W-40
Density at 20°C ASTM D 1298 0.864
Viscosity at 100°C ASTM D 445 14.6 mm²/s
Viscosityt at 40°C ASTM D 445 102,1 mm²/s
Viscosity index ASTM D 2270 150
pour point ASTM D 97 -35°C
flash point ASTM D 92 232°C
TBN ASTM D 2896 7,1 mg KOH/g